HKS S-style L was designed to be highly reliable in various uses under any conditions. This new damper is recommended to preserve or improve the ride quality after upgrading tires and/or lowering the vehicle height. The driver can change the ride characteristics at will.
| Application | | Specification |
| Engine | LEA-MF6 | | Model Year | 12/05 – 13/08 | | Remarks | |
| | | FRONT | REAR | | Damping force adjustment | 30 steps | 30 steps | | Base valve | – | – | | Height adjustable lower bracket | ○ | ○ | | Upper mount | Stock | Stock | | Inverted/Normal type | Inverted | Normal | | Damper/Spring layout | Coilover | Separated | | Spring rate change at factory | Possible | Impossible | | Damping force adjustment with wire | – | – | Helper spring
(Spring rate N/mm) | – | – |
|
| Ride Height | mm |
| Factory *2 | Test data | Adjustable range
High – Low *3 | Drivable range
High – Low *4 | | FRONT | Ride height *1 | 621 | 586 | 648 ～ 564 | 648 ～ 586 | | Against stock | -27 | -62 | 0 ～ -84 | 0 ～ -62 | | REAR | Ride height *1 | 610 | 573 | 622 ～ 553 | 610 ～ 573 | | Against stock | -53 | -90 | -41 ～ -110 | -53 ～ -90 |
|
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS’ recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle. |
| Kit information |
| Spring of Full Kit |
| F | R | | Spring rate N/mm(kgf/mm) | 58.8 (6.0) | 39.2 (4.0) | | Free height (mm) | 200 | – | | Spring type | Straight | Special shape | | Recommended range to change spring rate N/mm(kgf/mm) | ±10（1） | – |
|
| Specification of damper |
| F | R | | Damping force (Rebound/Damping)N* | 941 / 235 | 412/ 127 | | Default position of dial | 20 | 20 | | Remaining damper stroke (Rebound/Damping)mm | 46 / 41 | 38 / 61 |
|
| * The value of the damping force is at piston speed of 0.1m/sec. |
| Setting data |
| F | R | | Default | Test | Drivable limit
High * | Drivable limit
Low * | Default | Test | Drivable limit
High * | Drivable limit
Low * | Length of
case (mm) | 330 | 305 | 344 | 305 | 376 | 340 | 377 | 340 | Spring
Set length(mm) | 195 | 200 | 185 | 200 | – | – | – | – | Length to ride hight
adjuster (mm) | 60 | 30 | 84 | 30 | 50 | 20 | 50 | 20 | | Lever ratio | 1.15 | 1.25 (spg) , 1.00 (dmp) |
|
| * Refer to the above explanation *3 of ride height information for drivable high and low limitations. |
| Test vehicle information |
| F | R | | Vehicle weight kg | 700 | 374 | | Tire size (Air pressure) kPa | 205 / 45 – 17 ( 230 ) | 205 / 45 – 17 ( 230 ) | | Wheel size | 7.0 J × 17 off 50 | 7.0 J × 17 off 50 | Alignment
(Toe/Camber) | Test data | 0 mm / －2°30′ | in 5 mm / -1°00′ | | Standard value | 0 ± 3 mm / 0°00′ ± 1 ° | 2 +2 -1 mm / -1°00’± 1 ° |
|
| * Test data at HKS. |
Applications
Models suitable for this product
| Make | Model | Year | Submodel |
|---|
| Make | Model | Year | Submodel |
|---|
| Honda | Fit | 2007 - 2013 | Base - 1.5L |
| Honda | Fit | 2007 - 2013 | Sport - 1.5L |
Reviews
There are no reviews yet.