HKS S-style C was designed for those who want to enjoy the driving with family or friends with customizing cars. HKS S-style C can provide comfortable long distance driving even with a customized car.
Single tube Design
A mono-tube suspension structure was utilized for high durability, and comfort even in the harshest driving conditions.
Inverted Strut Type
Strut type dampers use inverted design for added structural rigidity. High rigidity is maintained by supporting the large bending force with a thick pipe; it is retained even when wearing large tires that increase unsprung weight.
PNE Coating
PNE Coating’s corrosion resistance is 5 times as much as the galvanization’s. This coating can protect against rust, and its smooth surface requires less force to adjust the ride height than conventional dampers.
High Grade Damper Oil
Sports damper oil used for MAX IV series is chosen as a damper oil; it maintains stable damping force and restrains heat sagging caused during high-load driving and/or summer.
PVS(Pre-load Valve System) & M4P(MAX IV Piston)
PVS (Pre-load Valve System) allows dampening force generation at low speed whilst maintaining suitable force at high speed. An even larger effect is achieved when combined with M4P. As used in MAX Ⅳ series, M4P is able to balance dampening force generation at low piston speeds whilst maintain control at high speed.
New Design Bump Rubber
From compacts to mini vans, all new range of bump rubbers have been created to suit various vehicles and driving conditions to help reduce harshness from bottoming out.
Strengthened Rubber Upper Mount
Strengthened rubber upper mount for comfort during street driving.
Silent Tube & Spring Insulator
“Silent Tube” & “Spring Insulator” are equipped on springs to suppress unwanted noise.
Aluminum Lock Nut & Ride Height Adjuster
The anti-rust and corrosion characteristics for enhanced durability are featured. Using these can trim weight below the spring.
HKS warrants the suspension product for a period of one (1) year from the date of original purchase for overseas markets.
| Application | Specification | |||||||||||||||||||||||||||||||||||||
|
|
| Ride Height | mm | ||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| *1. Height from road surface to fender arch. *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS’ recommended setting.) *3. Adjustable range (However, the lowest value may not be road legal. Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive. Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.) *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.) Caution). Actual data depends on each vehicle. |
| Kit information | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Spring of Full Kit | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Specification of damper | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
| * The value of the damping force is at piston speed of 0.1m/sec. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Setting data | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
| * Refer to the above explanation *3 of ride height information for drivable high and low limitations. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test vehicle information | |||||||||||||||||||||||
| |||||||||||||||||||||||
| * Test data at HKS. | |||||||||||||||||||||||
| Point |
| ・Higher ride comfort is prioritized, especially for the rear side. ・Appropriate setting enables to achieve stable cornering and eliminate unsteadiness with large body roll. ・The sufficient front rebound stroke stabilizes the tires movement and traction. ・This product is appropriate for commuting, winding driving, driving with many passengers, and family leisure. ・Lowering the vehicle height narrows the gap between the fender and tire to create better appearance. ・The rear lower limit is the number obtained without the adjuster and placing the spring directly on the factory rubber seat.●Required Modification The factory rear mounting rubber and bump rubber must be cut and modified in order to install this product. |
Reviews
There are no reviews yet.