OEM brakes not cutting it?

We have taken the time here at Touge Tuning to provide what we believe to be the best complete brake kit for those looking to get the most out of their vehicles on the street. Swapping out for an expensive big brake kit isn’t always needed. With the parts we have chosen you can look to expect much greater stopping distances, a much more consistent brake pedal and a much lower chance of brake fade. These parts were selected with Canadian winters in mind and should not disappoint even in harsh conditions.

HPS 5.0 Brake Pads

For years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we’re closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car-friendly characteristics.

• Aggressive torque
• Great rotor & pad wear life
• Smooth & predictable control
• Designed to deliver high deceleration rates
• Consistent brake release characteristics for a smooth braking feel
• All Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron/Metal rotors.
• 100-750 F operating temperatures
• 100-550 F optimal temperature range

DBA 5K Brembo Swap Rotors

DBA’s 5000 Series T3 is the ultimate in direct replacement 2 piece performance brake rotor. Featuring all the benefits of the 5000 Series along with DBA’s patented world renowned T3 bi-directional slot design.

Built on the foundations of DBA’s T2 slot, the T3 slot design features additional precise CNC machined tri-symmetrical slots, resulting in an even quieter, more responsive and smoother braking experience. The T3 slot increases the number of exit points for brake pad friction dust and gases to escape through, further increasing the consistency and effectiveness of every brake stop.

DBA’s revolutionary universal slot design eliminates the need for separate left and right slot designs seen in traditional rotor designs.

DBA’s 5000 Series T3 rotors are recommended for all performance applications from street driving, 4×4 and SUV, light utility vehicles, track days, club racing, rally cars and armoured vehicles.

T3 rotors are denoted by the suffix (BLKS) in 5000 Series part numbers.

Note: Sold as a pair

Techna-Fit Brake Lines

Techna-Fit Braided Brake lines are of the highest quality and have an OEM-like Fit. All Techna-Fit lines come with all necessary hardware for installation and feature a coating on the braided line to protect it from sand, salt, and other debris. The lines are built to and approved by D.O.T. Specification.

Benefits
– Will last much longer than OEM Rubber brake lines
– Firm up brake pedal feel by removing the line expansion that you get with stock brake lines
– Coating on lines protects them from Salt, Sand, and Road Debris

All lines come in a Black coating to protect the stainless braid.

*This kit is for Front & Rear brake lines (One full set)*

Motul RBF600

Dry Boiling Point: 594°F
Wet Boiling Point: 401°F
DOT Rating: DOT 4

Extreme high-performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594F(312C) helps prevent vapor lock and brake fade during hard use, with excellent recovery time. Wet boiling point 401F(205C).