OEM brakes not cutting it?

We have taken the time here at Touge Tuning to provide what we believe to be the best complete brake kit for those looking to get the most out of their vehicles on the street. Swapping out for an expensive big brake kit isn’t always needed. With the parts we have chosen you can look to expect much greater stopping distances, a much more consistent brake pedal and a much lower chance of brake fade. These parts were selected with Canadian winters in mind and should not disappoint even in harsh conditions.

HPS 5.0 Brake Pads

For years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we’re closer than ever to pushing the ABS Rev Limiter to its limits. High Performance Street 5.0 pads give your vehicle the greatest stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car-friendly characteristics.

• Aggressive torque
• Great rotor & pad wear life
• Smooth & predictable control
• Designed to deliver high deceleration rates
• Consistent brake release characteristics for a smooth braking feel
• All Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron/Metal rotors.
• 100-750 F operating temperatures
• 100-550 F optimal temperature range

DBA 3K Rotors

DBA’s Street Series direct replacement rotors are ideal for drivers seeking OE-level braking or entry-level performance braking.

As one of the most safety-critical components in any vehicle, DBA manufactures above OEM standards as our minimum requirement.

DBA’s Street Series improves on traditional OE rotors with DBA’s patented Kangaroo Paw ventilation* for improved heat reduction and EnShield Protection* for rust free rotors, available with either an OE style CBN machine finish, X Gold cross drilled (X)* or DBA’s patented T2 bi-directional (S) slot design.

DBA’s Street Series rotors feature:
• Kangaroo Paw ventilation
• Direct replacement suitability
• Moisture-proof corrosion protection packaging

DBA recommends the street series for daily drivers, light commercial, and street SUV applications.

Note: Sold as a pair

Techna-Fit Brake Lines

Techna-Fit Braided Brake lines are of the highest quality and have an OEM-like Fit. All Techna-Fit lines come with all necessary hardware for installation and feature a coating on the braided line to protect it from sand, salt, and other debris. The lines are built to and approved by D.O.T. Specification.

Benefits
– Will last much longer than OEM Rubber brake lines
– Firm up brake pedal feel by removing the line expansion that you get with stock brake lines
– Coating on lines protects them from Salt, Sand, and Road Debris

All lines come in a Black coating to protect the stainless braid.

*This kit is for Front & Rear brake lines (One full set)*

Grimmspeed Master Cylinder Brace

Pressing Subaru brakes leaves a lot to be desired, especially when every inch counts in a race or when you are depending on them to save your life! The dramatic firewall flex is the source of this performance flaw in Subarus that we came to solve. Skipping the “standard bracket” that others have been making we engineered the most simple to install and best-performing master cylinder brace on the market. The GrimmSpeed™ Master Cylinder Brace takes a beating and comes back for more! Crafted from hardcore CNC laser cut 12L14 with multi-point welded fabrication. It is the Abrams Tank of master cylinder braces touting 5 factory mounting points, the most available from any brace. Powdercoated black this brace will outlive your car and win you some style points to boot. Most importantly this brace kit will kill your wimpy pedal feel and give you the immediate and tight response that your performance car deserves and needs when you hit the track or rally. This brace will give you confidence similar to that of SS braided brake lines with precision stopping. Not to mention street driving just got a whole lot more fun!

Improve pedal feel and braking capabilities!

• Large diameter Force Distribution Cap
  (Will not mar and damage the master cylinder like other braces)
• Fits both Autos and Manuals
• Indestructible CNC Laser cut 7GA Steel construction and black powder coating
• Pedal feel dramatically improved (Similar feeling to SS Braided brake lines)
• Does not require any cutting or modification of stock components.
• Simple Allen key-locking mechanism

The reinvention of heavy-duty, it’s what you can expect from GrimmSpeed™

Motul RBF600

Dry Boiling Point: 594°F
Wet Boiling Point: 401°F
DOT Rating: DOT 4

Extreme high-performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594F(312C) helps prevent vapor lock and brake fade during hard use, with excellent recovery time. Wet boiling point 401F(205C).