PORTS AND FITTINGS

The fuel rail ports are tapped for 8AN ORB and 1/8 NPT.

Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.

20-0370-PK Fuel Rail Plumbing, Honda B-Series
The plumbing kit includes the items shown in the image above. 

This kit only includes the plumbing. The full kit and fuel rail are linked below:

Radium Engineering Fuel Rail Kit – Honda B-Series OEM Configuration

Radium Engineering Fuel Rail – Honda B-Series OEM Configuration

Manufactured with a large internal bore, the fuel rail can support all necessary engine power requirements. They are CNC machined from 6061 aluminum, anodized, and laser etched for a high-quality surface finish. Like the OEM fuel rails, the injector bores are 11mm ID so factory injectors, or any equivalent aftermarket injector, can be used.

There is a provision to reuse the OEM fuel pressure regulator (FPR). If not using the OEM FPR, there will be an open 1/8NPT port that can be used for ancillary sensors, or it can be plugged. Shown in the 1/8 NPT port below is a 20-0029 Fuel Pressure Gauge with a 14-0332 1/8NPT Male To Female, 90Deg elbow. These can be found on our website.

A Radium 20-0223 DMR, 8AN ORB regulator (shown in the end port) can be used in place of the OEM FPR. Furthermore, a Radium 20-0176 FPD-R, 8AN ORB fuel pulse damper can be installed (shown in top port). These can both be found on our website.

The kit is compatible with all fuel types including popular alcohol mixtures such as E85. The fuel rail mounts using the OEM studs, nuts, and insulating spacers.