Radium Engineering Dual Catch Can Kit – 2017-2019 Honda Civic Type-R

$537.25

Documents

Instructions & Videos

The Radium Engineering catch cans are the most functional and integrated kits on the market. The catch cans mount using factory holes and integrate perfectly with the surrounding components. These two oil catch cans (PCV side and CCV side) function completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed-loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed-loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required.

The Radium Engineering PCV Catch Can Kit for the 2017-2019 Honda Civic Type-R is for LHD vehicles. It secures to the RH firewall with no modifications required.

This catch can runs inline with the PCV (positive crankcase ventilation) valve and retains it’s factory function. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV “check” valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience “metered” vacuum when the engine is idling, steady-state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: No inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted.


The Radium Engineering CCV Catch Can Kit – 2017-2019 Honda Civic Type-R fits under the OEM engine cover with no modifications required.

The catch can secures to the RH motor mount (shown above). If an aftermarket motor mount is used, minor modifications may be required. This catch can runs inline with the crankcase vent port. At low loads, it experiences atmospheric pressure, but when the engine is at high load (WOT), this line will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance.

The crankcase vent lines are routed over the engine and billet clamped to the turbo inlet pipe using temperature resistant metal tubes.

For the ultimate in engine protection, Radium recommends 20-0426 Dual Catch Can Kit, Civic Type-R.


This kit utilizes both the “CCV” and “PCV” catch can kits detailed above. It is designed for LHD vehicles.

Each kit features the following:
-An anodized oil catch can with integrated condenser and dipstick
-Anodized aluminum Honda FK8 specific mounting bracket
-Anodized aluminum -AN adapter fittings and hose ends
-Enough PCV hose for custom applications
-Stainless steel mounting hardware

PETCOCK DRAIN KIT OPTION, NOT INCLUDED

-Anodized 4AN ORB barbed fitting
-Nylon ¼” barb mini ball valve
-PCV Compliant Rubber Hose

This kit, sold separately, can be used to remotely drain the catch cans without the need to unscrew the canister body. Linked HERE.

Weight2.5 kg
Dimensions30 × 30 × 20 cm

Reviews

There are no reviews yet.

Be the first to review “Radium Engineering Dual Catch Can Kit – 2017-2019 Honda Civic Type-R”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Applications

Models suitable for this product

MakeModelYearSubmodel
MakeModelYearSubmodel
HondaCivic2017 - 2019Type R - 2.0L Turbo

Got something to discuss?