HKS Oil Cooler Kit for 86/BRZ NA engine was redesigned and is now offered at more affordable price.
Installation requires no major modification. All necessary parts for installation are included in the kit.

Features

• Newly designed single tube type fitting.
• From engine bench tests and experience from D1 racing it is found that the oil pressure of the FA20 engine is extremely high compared to the conventional mass-produced engines. (Max oil pressure: over 12kgf/cm²) New single tube fitting withstanding the high oil pressure was newly designed and included in the kit.
• Including the pre-assembled hose, bracket, and air guide and locating the core in front of the radiator enable an easy installation. Also, there is no major modification required to the chassis.
• Special spacer and center bolts were designed exclusively for this kit to install the oil cooler attachment without modification.
• The thin 15-layer core improves the cooling performance and makes installation easier.
• This kit is applicable only to the NA engine.(A kit for the supercharged engine is under development)

The following parts are included:

・Oil Cooler Core　・S-type Attachment　・Spacer ・Center Bolt ・Banjo　・Banjo Bolt ・Bracket
・Air guide　・Accessory Parts

The characteristics of oil temp. and the water temp.

※ This is the result of the test HKS conducted. The result may vary depending on the test conditions.

●Test Data Test Vehicle TOYOTA 86 Specifications GT SUPERCHARGER SYSTEM Pro STEP2（300ps) Super Manifold R-Spec/Legamax Sports S-Tail Test Course Fuji International Speedway Racing Course Weather Sunny Temperature: 12℃

 

* The circuit driving by 86/BRZ with GT Supercharger which engine output was increased to 300ps was done under conditions that was very difficult to maintain the oil temperature. However, the oil temperature of this vehicle with this oil cooler kit was maintained around 110℃ through the 25 min test drive without any trouble.

 

Vehicle	Model	Engine	Model Year	Core Size・Row	Core Location	Type	Hose Size	Aluminum Air Guide	Code No.	Price	Remarks
												86	ZN6	FA20	16/08-	200x200x32・15	Inside right fender	S type	#10	○ (FRP)	15004-AT012		GT Supercharger system Pro Kit compatible.Need radiator support and resin cover modification.