NOTE: Not compatible with the model equipped with REAS.
Return of Drag Specification Dampers
Introducing the latest technologies to suit modern drag racing requirements
The drag suspension designed based on HIPERMAX II Drag Suspension.
Parts such 300mm long spring, helper spring, etc. are selected for each vehicle model to maintain sufficient stroke amount and traction.
The shock-body length adjustable type is chosen to widen the vehicle height setting range and stroke distribution.
This drag suspension guarantees its performance in drag race.
Single Tube Damper DesignThe single tube damper design was selected from well-established HKS suspension.
Its large diameter piston contribute excellent response and traction assurance.Dust BootProtect the shaft from the flying stones.PNE CoatingUsing this special surface coating provides 5 times better durability over standard galvanizing. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.Pillow Ball Upper MountWith the pillow ball upper mount, the shock absorber detects fine movement and generates accurate damping force from the beginning of stroke. Unnecessary movement is reduced and stable driving is possible.New Design NeedleNewly designed needle has been utilized to adjust the damping characteristics of the very low speed and middle and high speed dampening to pursue the linear change across entire speed range.Reduction of Unsprung WeightIn order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminum. (Not for all vehicles)30 Step Damping Force Adjustment30 levels of dampening adjustment allow fine tune adjustment for each tire and course conditions.
Application | Specification | |||||||||||||||||||||||||||||||||||||
|
|
Ride Height | mm | ||||||||||||||||||||||||||||
|
*1. Height from road surface to fender arch. *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS’ recommended setting.) *3. Adjustable range (However, the lowest value may not be road legal. Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive. Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.) *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.) Caution). Actual data depends on each vehicle. |
Kit information | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Spring of Full Kit | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
Specification of damper | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
* The value of the damping force is at piston speed of 0.1m/sec. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Setting data | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
* Refer to the above explanation *3 of ride height information for drivable high and low limitations. |
Test vehicle information | |||||||||||||||||||||||
| |||||||||||||||||||||||
* Test data at HKS. |
Point |
Drag specification damper is returned with the latest technologies taking over the proven performance of HIPERMAX II DRAG damper. Setting range is dramatically improved by new spring rates and damping force specifications, and shock-body length adjustable design. |
Reviews
There are no reviews yet.