This kit is designed to add 0.5 deg static positive caster to both front wheels while changing the nature of front anti-dive and lift. The low compliance bush also maintain higher dynamic positive castor. By changing the front control arm geometry, the new alloy mounts coupled with the new low compliance polyurethane bushes change front suspension attitude. This leads to superior traction under power including cornering, dramatically reducing understeer and front wheel spin.

The additional castor coupled with the new firmer bushes supplied serve to dramatically sharpen initial turn-in response, then forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Kit contains:

• 2 x Alloy mounts with pre fitted poly bushes and centre tubes. Marked LEFT and RIGHT.
• 2 x M16 nyloc nut
• 2 x large chamfered washers
• 1 x grease satchel
• 2 x M10 80mm long bolts
• 2 x M10 45mm long bolts
• 2 x large flat washers
• 2 x small flat washers
• 2 x spacer disc 4.5mm thick [no grooves]
• 2 x spacer disc 9mm thick [1 groove]
• 4 x spacer disc 11mm thick [2 grooves]
• 12. 2 x spacer disc 15mm thick [3 grooves]
• 13. 2 x rectangular spacer block