Want to keep your Subaru alive as long as possible?

While most people will tell you the only way to get a reliable Subaru is to either sell it or spend huge amounts of money swapping out every part, that is not necessarily the case. The team at Touge Tuning has been building reliable Subarus that get driven hard for years, and we’ve put together a combo for all the things your Subaru needs to give it the best chance at lasting as long as possible!

This package specifically is for your street-driven Subaru! If you plan to track the car, you may want THIS combo that swaps out the pickup and baffle for a full oil pan combo!

Radium Engineering Air Oil Separator AOS-R Kit

Killer B Ultimate FA20 Oil Pickup

The OEM pickup screen is crimped in a retainer and that assembly is spot welded into the pickup ‘can’. There are a couple of flaws with this process. One is that the screen is creased where the retaining ring is crimped over it. The other is the spot weld process embrittles the screen. We pushed on the screen of new OEM pickups, and several popped wire strands, without a lot of effort.

Being known for making the best Subaru Performance Oiling Products money can buy, addressing this was right up our alley. Of course, our own spin of improvements, besides the obvious had to be made to assure set it and forget reliability that comes with our products. A means for improving performance was taken advantage of during the design process as well.

The obvious big change is the tube has no bend. No bend means no restriction, and even better coming from the OEM tube because it uses a more restrictive pinch bend. The ID of the tube has been increased, and so has the thickness. The angle of the tube points it directly at the inlet into the block. Like our EJ engine Ultimate Oil Pickup this one too uses a screen to match the OEM spec opening size of the mesh. Although, we use a higher strength screen material. The screen area has been increased over 31% which reduces the restriction and stress on the screen. Our screen is lightly pressed and welded into place assuring the wire does not gets stresses or heat damages. TIG welding throughout assures proper weld penetration and quality. The material is 4130 Alloy Steel to further provide an increase in strength over the brazed stamped steel OEM version. The units have been pressure tested to 150psi over the face of the screen without issue.

• Tube features larger inside diameter and thicker wall for increased flow capacity and strength.
• No bends provide maximum flow potential (OEM unit uses a restrictive punch bend).
• Screen flow area increased by over 31% to improve flow, reduce restriction.
• Made from 4130 High Strength Alloy Steel for never fail reliability
• Hand TIG welded
• Made in the USA

Perrin Engine Oil Cooler Kit

Why Do I Want This?

In racing conditions engine oil temperature skyrockets. This causes decreased engine performance and reduces the oil’s ability to properly lubricate. A well designed engine oil cooling system like the PERRIN Oil Cooler Kit will help keep temperatures within the desired temperature range, thus maintaining performance and prolonging engine life.

Heat Exchanger

Each PERRIN oil cooler uses a Setrab core which maximizes heat dissipation without pressure build-up. Oil-ways are interspaced with airway corrugations providing optimum heat transfer, while the oil passages use “turbulators” to break down boundary layer effects in the oil flow.

Setrab Oil Coolers employ an in-line turbulator to gently stir the fluid being cooled, thereby ensuring that the fluid has exposure to the entire internal surface area of the oil cooler with the least pressure lost. The turbulators are fully brazed to the entire internal length of the tube resulting in zero heat transfer barrier and high strength.

Integrated Thermostat

The PERRIN Performance filter adapter features an integrated 85°C (185°F) thermostat. This means oil will not start flowing through the oil cooler until oil temps reach an optimum temperature of 85°C.

Oil Spacer

In addition to the OEM oil filter from Subaru, we include a PERRIN spacer which allows for easier installation of the thermostat-filter assembly.

Mounting Brackets

The PERRIN Oil Cooler comes with custom brackets that allow the cooler core to mount directly to existing holes in the OEM splash guard of your vehicle. Made from CNC machined 6061 T6 aluminum, the brackets look sleek and stylish while blending in seamlessly behind your bumper.

Preassembled Hoses

PERRIN’s FR-S/BRZ oil cooler kit uses lightweight Aeroquip brand -10 hose that is rated for 250psi and 300°F continuous temperature. Each hose consists of anodized -10 push-lock type aluminum hose ends. These fittings are designed to fit without the need for clamps, but we take the extra step and add a clamp ensuring they will never come apart. Unlike other kits that make you assemble your hoses, PERRIN preassembles them for you!

Oil Cooler Core Dimensions – 13″ x 4″ x 2″

Whats in the Box?

• (1) PERRIN Oil Cooler Core
• (1) PERRIN Oil Filter Spacer
• (1) Thermostat Oil Filter/Cooler Adapter
• (1) M20 Threader Adapter
• (1) Long High Pressure Hose
• (1) Short High Pressure Hose
• (1) Subaru Factory Oil Filer
• (2) PERRIN Oil Cooler Mounting Brackets
• (2) 1.25″ OD Fender Washers
• (2) M6x50 Socket Cap Screws
• (4) M6x15 Button Head Bolts
• (15) Zip ties
• (1) PERRIN License Plate Frame
• Warranty & Instructions

Koyorad Hyper V-Core Series Aluminum Racing Radiator

Hyper V-Core Series Aluminum Racing Radiator (VH012664N) by Koyorad®. The Hyper V-Core series is the newest to the Koyorad all-aluminum racing radiator line up. An engine’s cooling system in many newer vehicles is suffering due to limited space and crowding which affects air circulation. Their new ultra-efficient Hyper V-Core was developed specifically for vehicles that see extreme heat, are limited in space, and where the factory inlet/outlet locations.

Features:

• High-density fully brazed Hyper-V Series 1.4″ cross-flow core
• Optimized locations for inlet, outlet, and fan temp switch
• Brushed aluminum finish
• Two Row construction
• Precision TIG welded
• Nocolok™ Brazing
• Billet aluminum filler neck and drain plug
• Triple Pressure tested

The Hyper V-Core series radiators have a specially designed fin and tube pitch which significantly increases its surface area while still allowing for excellent air circulation through the radiator. The Hyper V-Core series is the perfect solution where space savings and high performance is a must. Unless noted otherwise, all Koyorad Hyper V-Core series all-aluminum radiators are Nocolok™ brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans.

Koyorad quality is a direct result of their privately owned factories which allow Koyorad Japan to oversee each stage of radiator production. This ensures that quality is never sacrificed for quantity. Each Koyorad all aluminum radiator core is hand assembled, Nocolok™ brazed, then TIG welded by hand with the finest aluminum available. These are just a few characteristics that have earned Koyorad Radiators their excellent reputation in performance radiators worldwide.

Koyorad Aluminum Filler Neck

Aluminum Filler Neck by Koyorad®. To keep your engine cool and improve your vehicle’s performance, this product is just the right solution. Manufactured from high-quality materials, it will surely provide excellent performance and years of trouble-free service.

Features:

• High quality at an affordable price
• Expertly made from premium materials
• Built to match your exact requirements

If you are a car junkie, you certainly keep all the systems and parts of your vehicle in perfect condition. Surely, the cooling system is no exception, and if you want your vehicle to function at its full potential, the high-quality performance cooling parts we offer are just what the doctor ordered. This product has a heavy-duty construction to be reliable and durable enough to hold up to hard use and wear. So, if you’re looking for performance cooling parts with increased capacity and heat transfer capability.

Mishimoto Silicone Radiator Hoses

Keep your Subaru BRZ on the road and out of the shop by upgrading to the Mishimoto Silicone Radiator Hose Kit. Mishimoto silicone hoses are manufactured with four layers of high-grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance. A Mishimoto silicone radiator hose is the perfect upgrade for a stock or boosted FA20 and retains factory fitment for an easy installation. This hose kit is available in black, blue, and red.

INTERIOR MATERIAL
Heat Resistant Embedded Fibers

EXTERIOR MATERIAL
Silicone

MAX TEMPERATURE
330 F

INNER DIAMETER
Hose 1: 1.55″
Hose 2: 1.55″
Hose 3: 1.55″
Hose 4: .30″

OUTER DIAMETER
Hose 1: 1.90″
Hose 2: 1.90″
Hose 3: 1.90″
Hose 4: .52″