PORTS AND FITTINGS

The fuel rail ports are tapped for 8AN ORB.

Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.

For details about the Fuel Rail Plumbing Kit, follow the link HERE. NOT INCLUDED IN THIS KIT.

Reference the chart below to be sure the proper fuel rails are ordered.

20-0568-02 linked HERE.

20-0567-02 linked HERE. (THIS PART)

20-0577-02 linked HERE.

20-0372 linked HERE. Please note that you need this part AND the part above (blue link).

These fuel rails have the same mounting and injector spacing as the 20-0577-02 (linked above). However, these fuel rails feature an 8AN ORB port machined in the underside center of each fuel rail.

NOTE: The center port bulge can create an interference with early AVCS solenoids found in the EJ207 and JDM EJ205. If this is the case, use P/N: 20-0577-02 above.

Included:
-Black Anodized Laser Etched Aluminum Fuel Rails (x2)
-Phenolic Thermal Insulating Press-In Spacers, 20mm (x4)
-Stainless Steel M8x1.25 Mounting Bolts (x4)